Chapter 1 Overview, Required Tools, Preinstallation Checks, And List Of Hardware Fasteners; Important Updates For The Cisco Telepresence Experience And Order Assurance Program - Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual

Overview, Required Tools, Preinstallation
Checks, and List of Hardware Fasteners
Revised: May 20, 2015, OL-27038-01
This chapter includes an overview of various pre-installation checks you should perform prior to
installation and includes the following sections:
•
•
•
•
•
Important Updates for the Cisco TelePresence Experience and
Order Assurance Program
While immersive TelePresence orders are processed in the same way as other Cisco collaboration
endpoints, the Cisco Advanced Technology Partner (ATP) performs additional network and room
readiness before the system is installed into the customer's premises. It is the partner's responsibility to
make sure that all network and room readiness is performed prior to the system being powered on and
connected to the customer's network. This preparation ensures the best immersive experience.
The partner will design and implement your network for your immersive system using the latest
requirements and guidelines for bandwidth, Quality of Service (QoS), latency, packet loss, and packet
jitter. In addition, the partner will make sure that the room in which the system is installed follows all
room requirements that are provided in
Systems.".
This room readiness information was previously performed by partners using the Room Readiness
Assessment (RRA) and Network Path Assessment (NPA) tools. For more information about the RRA
and NPA, refer to the Experience and Order Assurance page at http://tools.cisco.com/tsbu/oa/index.html.
For more partner-specific room and network information, refer to the Cisco TelePresence partner
community, located at the following URL (partner-level login required):
https://communities.cisco.com/community/partner/collaboration/bizvideo/tp
OL-27038-01
Important Updates for the Cisco TelePresence Experience and Order Assurance Program, page 1-1
Differences Between the CTS-3010 and CTS-3210 Installation and the TX9000 and TX9200
Systems, page 1-2
Tools and Equipment List, page 1-2
Pre-Installation Checks, page 1-3
Installation Overview, page 1-10
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
C H A P T E R
Chapter 2, "Room Requirements for the TX9000 and TX9200
1
1-1