Table of Contents
Advertisement
Managing Hardware Setup
Step 3
Using a supported Internet browser, log in to the Cisco TelePresence System administration application.
Step 4
Choose Troubleshooting > Hardware Setup
Step 5
Click the Cameras radio button. The Camera Menu window appears, as shown in
Figure 6-7
Camera Menu
Step 6
Click Start to start the camera test.
Step 7
Click Show Camera Target. The Camera Target menu appears, as shown in
Cisco TelePresence System Release 1.5 Administrator Guide
6-10
Chapter 6
Troubleshooting the CTS 1100
Figure
6-7.
Figure
6-8.
OL-13676-04
Advertisement
Table of Contents
Troubleshooting
