Table of Contents
Advertisement
Navigation
Administration Window Header
The header at the top of all Cisco TelePresence System Administration windows contains the name of
the person currently logged in and provides links for the following functions:
•
•
•
Content Area
The frame on the right is the content area, and the gray bar above the content area shows the navigational
path so you can quickly identify where you are at any time.
Typing and Selecting Information in Fields
To modify information in fields, use the mouse to highlight and delete existing information. Type in new
information.
Some fields offer drop-down menus from which you choose settings.
Validating Information in Fields
Some Cisco TelePresence System Administration windows contain Apply and Reset buttons, which are
initially disabled. Once you change or add settings in these windows, both buttons become enabled.
•
•
Other Cisco TelePresence System Administration windows have fields containing information such as
IP addresses, domain names, media port numbers, and so on, that are validated when you exit the field.
When information in a field is found to be invalid, a message describing the error is displayed.
Validating Information in Windows
When you go to the navigation pane and click a task, the Cisco TelePresence System Administration
software checks data in the current window and takes an action, as follows:
•
•
•
Cisco TelePresence System Release 1.6 Administration Guide
1-8
Logout—Click to log out of the system.
Help—Click to display online help for using the Cisco TelePresence System Administration.
About—Click to display software version and licensing information.
Use the Apply button to apply new or modified information. When you click Apply, validation is
performed for all fields in that window, and a message is displayed if there is invalid data in the
fields.
Use the Reset button to discard changes and restore the values shown when the window was first
displayed.
If all changes are saved, the content area displays the requested window.
If there are unsaved changes in the current window and data is valid, a message reminds you that
there are unsaved changes. An OK button saves the changes, and a Cancel button allows you to
continue modifying data.
If there are unsaved changes and the data is not valid, a message explains what to do and provides
OK and Cancel buttons to assist you.
Chapter 1
Using the Cisco TelePresence System Administration Interface
OL-13676-05
Advertisement
Table of Contents
Troubleshooting
