Administrators Working With The Setup And Configuration Of What's New In Ce9 - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction Introduction
What's new in CE9
This chapter provides an overview of the new and changed
device settings (configurations), and the new features and
improvements in the Cisco Collaboration Endpoint software
version 9 (CE9) compared to CE8.
The following Webex products are new in CE9:
• CE9.0 - Room Kit
• CE9.1 - Codec Plus, and Room 55
• CE9.2 - Room 70
• CE9.4 - Codec Pro, Room 70 G2, and Room 55 Dual
• CE9.6 - Room Kit Mini
• CE9.8 - Board 55/55S, Board 70/70S, and Board 85S
• CE9.12 - Desk Pro
For more details, we recommend reading the Software release
notes:
► https://www.cisco.com/c/en/us/support/collaboration-
endpoints/telepresence-quick-set-series/tsd-products-support-
series-home.html
D15330.18 SX10 Administrator Guide CE9.12, APRIL 2020.
Configuration Peripherals
New features and improvements in CE9.12
New products
• Cisco Webex Room USB
• Cisco Webex Desk Pro
DX Series renamed to Desk Series
The new Desk Series contains the DX70, DX80, and
Desk Pro products.
Support for using Room Kit Mini with
Samsung Flip
The Room Kit Mini can be connected with a Samsung
Flip device to get a touch interface. Then, you can
also use the whiteboard feature. You can easily switch
between the Samsung Flip and the Room Kit Mini user
interfaces by pressing the Flip button.
One-way whiteboard sharing in-call
You can now share the whiteboard while in-call.
To initiate this, click the Home button followed by
the Whiteboard button. Enter Editing mode and the
sharing will begin. To stop the whiteboard sharing,
press the Done button, followed by Stop sharing.
Note that the whiteboard share is one-way. Only
the device sharing the whiteboard can draw on the
whiteboard. Remote participants can only observe.
Maintenance
(Room Kit Mini)
(Boards)
www.cisco.com — Copyright © 2020 Cisco Systems, Inc. All rights reserved.
6
Administrator Guide
Device settings Appendices
Webex Join support for Personal Meeting
Room IDs
(All Products)
The Webex Join button now supports dialing Personal
Meeting Room (PMR) IDs. You can address them by
entering the full URL or a short path (i.e., username.
sitename); as well as, by entering the meeting
number.
PMRs from your recent calls list will be suggested as
you type.
HTTP proxy support for Webex Edge for
Devices
(All products)
HTTP Proxy support has been enhanced to include
devices linked to Webex Edge for Devices.
Webx Edge for Devices can select the HTTP Proxy
services for the HttpClient, HttpFeedback, and/or the
WebEngine.
If so enabled, all HTTP requests to the Webex
Cloud will use the configured HTTP Proxy. However,
regardless of the Proxy Mode, the device will never
communicate with the Cisco Unified Communication
Manager (CUCM), MRA (CUCM via Expressway), or
TMS (phonebook) via proxy.
In addition, the following new settings allow you to
enable/disable use of the HTTP Proxy:
• HttpClient UseHttpProxy
• HttpFeedback UseHttpProxy
• WebEngine UseHttpProxy