Table of Contents
Advertisement
Managing Hardware Setup
For more information about testing and troubleshooting the CTS 1300, see the
section in the
Field-Replacement Unit
Replacing the Camera Cover
Place the foam lens covers onto the camera lenses, as shown in
Step 3
Figure 7-46
Step 4
Replace the camera cover onto the camera cluster, then tighten the cover release screws to secure the
cover to the camera, as shown in
Cisco TelePresence System Release 1.6 Administration Guide
7-50
First-Time Setup
chapter of the
Guide.
Attaching the Foam Lens Covers to the Camera Lenses
7
Figure
Cisco TelePresence 1300 Assembly, Use & Care, and
Figure
7-47.
Chapter 7
Troubleshooting the CTS 1300
Setting Up the Camera
7-46.
OL-13676-04
Advertisement
Table of Contents
Troubleshooting
