Table of Contents
Advertisement
Testing Audio
Navigating Long Lists
The log file can hold up to 2 MB worth of SIP messages. To navigate long lists, follow these steps:
Choose the number of rows that you wish to see on one page from the Rows Per Page drop-down menu.
Step 1
Double click to select and open single message details. The SIP Message Details window appears.
Step 2
If there are multiple pages listing log files, click the First, Previous, Next, or Last button to navigate to
Step 3
the desired page.
Click the radio button to the left of the table entry, and then click Clear to delete a single error message.
Step 4
Click Clear All to delete all error messages displayed.
Step 5
Related Information
For more information, see the following documentation:
•
•
Testing Audio
You can test the system audio in your meeting room and send the results to Cisco Systems technical
support for analysis.
Note
Audio recordings can be made only while the CTS system is in a call.
To record audio, follow these steps:
Choose Troubleshooting > Audio.
Step 1
Click Start Recording Audio to start recording all audio in the local meeting room including audio from
Step 2
remote meeting rooms. Recording will continue up to a maximum of two minutes unless you manually
stop recording.
Both endpoints will beep periodically during the recording process and when audio add-in participants
Note
join the call.
Step 3
Click Stop Audio Recording to stop recording.
Step 4
After you complete the recording and download the results, send the results to Cisco Systems technical
support.
Cisco TelePresence System Release 1.6 Administration Guide
8-44
Session Initiation Protocol (SIP)
Cisco TelePresence System Message Guide
Chapter 8
home page on Cisco.com.
Troubleshooting the CTS 3000 and CTS 3200
OL-13676-05
Advertisement
Table of Contents
Troubleshooting
