Table of Contents
Advertisement
Chapter 7
Troubleshooting the CTS 1300
Figure 7-20
Step 2
In the Cisco TelePresence Administration window, click the Left radio button.
Step 3
Click Show Camera Target.
Step 4
Focus the left camera by completing the following steps:
a.
Loosen the focus ring thumbscrew on the lens of the center camera.
Rotate the focus ring until the black plus sign (+) on the target is clearly in focus.
b.
Note
Figure 7-21
Zoom ring
OL-13676-04
Positioning the Left Target
Left participant
sitting position
camera target
The camera lens has two adjustment rings, one for focus and one for zoom, as shown in
Figure
7-21. The focus ring is the one that is nearest to the wall.
Location of Focus and Zoom Ring
Display
Alignment
marker
Focus ring
Cisco TelePresence System Release 1.6 Administration Guide
Managing Hardware Setup
7-25
Advertisement
Table of Contents
Troubleshooting
