Table of Contents
Advertisement
All of the rooms that are to be added to the call must support this feature.
Note
CTS Auto Answer
This feature allows the CTS endpoint to override the Cisco Unified CM directory number (DN) settings
so that you do not have to configure the phone to answer with the speakerphone. See the CTS Auto
Answer field in the Product Specific Configuration Layout section for your device in the
Cisco Unified Communications Manager Configuration Guide for the Cisco TelePresence
CTS Device Support - CTS 3010 and CTS 3210
Table 1
devices.
Table 1
CTS 3000 Series Platform Documentation
Document
Removing the Projector and Adding a
Presentation Display for CTS 3000 and
CTS 3200 Systems
Cisco TelePresence System 3010 Assembly, Use
& Care, and Field-Replaceable Unit Guide
Cisco TelePresence System 3210 Assembly, Use
& Care, and Field-Replaceable Unit Guide
Cisco LCD-100-PRO-40N Presentation Display Manageability on the CTS 3010 and CTS 3210
Manageability has been added to the CTS Administration interface for the Cisco LCD-100-PRO-40N
40-inch auxiliary display on the CTS 3010 and CTS 3210. You can select presentation defaults if your
CTS 3010 or CTS 3210 uses a display rather than a projector for the external presentation. See the
following documents on Cisco.com for more information:
•
•
•
Discovery Service
To display and modify settings that associate CTS-Manager with Cisco Unified CM, choose the
Discovery Service in the CTS-Man System Configuration settings. Configuration > Discovery provides
Service Status and lists Cisco Unified CM connections.
Note
If you are changing settings in Cisco Unified CM, you must select Discovery Service in CTS-Manager
so that the new settings are registered. Otherwise, CTS-Manager will not display or connect to the
correct settings.
See the
Cisco TelePresence System Release 1.6 Administration Guide
iv
contains new CTS Administration documentation to help you manage your CTS 3000 Series
Type
Upgrade Guide
Install and Upgrade
Guide
Install and Upgrade
Guide
The
Troubleshooting the CTS 3010 and CTS 3210
The
First-Time Setup
chapter of the
Field-Replaceable Unit Guide
The
First-Time Setup
chapter
Field-Replaceable Unit Guide
Cisco TelePresence Manager
Description
Upgrades hardware in an existing CTS 3000 Series
installation, including removing the projector and
adding new speakers, speaker covers, and LCD
display.
Outlines the steps and best practices for assembling
and installing the Cisco TelePresence 3010.
Outlines the steps and best practices for assembling
and installing the Cisco TelePresence 3210.
chapter of this guide
Cisco TelePresence System 3010 Assembly, Use & Care, and
Cisco TelePresence System 3210 Assembly, Use & Care, and
home page on Cisco.com for support documentation.
Preface
System.
OL-13676-05
Advertisement
Table of Contents
Troubleshooting
