Administrators Working With The Setup And Configuration Of What's New In Ce9 - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction Introduction
What's new in CE9
This chapter provides an overview of the new and changed
system settings, and the new features and improvements in the
Cisco Collaboration Endpoint software version 9 (CE9) compared
to CE8.
The following products are new in CE9:
• CE9.0 - Room Kit
• CE9.1 - Codec Plus, and Room 55
• CE9.2 - Room 70
• CE9.4 - Codec Pro, Room 70 G2, and Room 55 Dual
• CE9.6 - Room Kit Mini
For more details, we recommend reading the Software release
notes:
► https://www.cisco.com/c/en/us/support/collaboration-
endpoints/telepresence-quick-set-series/tsd-products-support-
series-home.html
D15330.14 SX10 Administrator Guide CE9.7, APRIL 2019.
Configuration Peripherals
New features and improvements in CE9.7
Connect to xAPI over a WebSocket
(All products)
You can now connect to the xAPI over WebSocket.
The communication channel over WebSocket is open
both ways until it is explicitly closed. This means that
the server can send data to the client as soon as the
new data is available, and there is no need for re-
authentication for every request. This improves speed
significantly compared to HTTP.
Each message contains a complete JSON document
and nothing else. Many programming languages have
good library support for WebSocket and JSON-RPC.
WebSocket is not enabled by default. Note that
WebSocket is tied to HTTP and HTTP or HTTPS must
be enabled before you can use WebSocket.
For more information, see
guide.
Graphical sound mixer available on Audio
Console
(Codec Pro, MX700, MX800, Room 70 G2, Room 70D G2, SX80)
The Audio Console now has a graphical sound
mixer. It has 8 user-definable parametric equalizer
settings. A setting consists of up to 6 sections, each
of which has its own filter type, gain, center/crossover
frequency and Q value. Each section is shown with
its own color and the effect of altering any of the
parameters immediately becomes visible in the graph.
For more information, see the Customization guide
for CE9.7 at ► https://www.cisco.com/go/in-room-
control-docs
Maintenance
► xAPI over WebSocket
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
6
Administrator Guide
System settings Appendices
Ambient noise reporting
(Codec Plus, Codec Pro, Room 55, Room 55 Dual, Room 70, Room 70
G2, Room Kit, Room Kit Mini)
The Room series devices can be configured to report
the stationary ambient noise level in the room. The
reported value is an A-weighted decibel value (dBA),
which reflects the response of the human ear. Based
on reported noise, facility management or a building
manager can intervene to troubleshoot the issue.
All signal processing related to this feature is local and
the only data transmitted is the calculated noise level.
Support for multiple SRG-120DH/PTZ-12
cameras
(Codec Plus)
You can now connect up to three SRG-120DH/PTZ-
12 cameras to a Codec Plus using an HDMI and an
Ethernet switch.
Other updates
• 1080p support for Room Kit Mini when it is used
as a USB camera.
(Room Kit Mini)
• You can turn video off and on during calls.
products)
• A system administrator can prevent the use of
HTTP and only allow HTTPS Post and HTTPS Put
requests.
(All products)
(All