Call Connection Status Network Bars - Cisco CTS-3010 Administration Manual

Chapter 1 Using the Cisco TelePresence System Administration Interface

Call Connection Status Network Bars

The CTS software monitors the receiving video quality, and a set of network bars is displayed on the
main display screen to indicate the quality of a call. Connection quality is rated either good, marginal,
or poor. When connection quality reaches the poor state, the call is terminated.
Table 1
Table 1 Call Connection Network Status Bars
Status Bars
Five Bars—Lowest Resolution of
Received HD Streams—1080p
Four Bars—Lowest Resolution of
Received HD Streams—720p
Three Bars—Lowest Resolution of
Received HD Streams—Common
Intermediate Format (CIF)
OL-13676-05
describes main display screen call connection status network bars.
Description
Describes the lowest resolution of all received HD streams and the highest percentage
of packet loss of all received HD streams, affecting how the received presentation is
rendered. Range is 1 to 5 bars.
Connection Quality
The receiving video quality is either:
Poor—Call will be dropped
•
Good—Call is connected
•
The call connection status bars appear in the top right corner of the center main display
screen.
Call connection network status bars replace network congestion messages that
Note
are displayed on the main display screen.
Cisco TelePresence System Release 1.6 Administration Guide
System Status
1-5