Chapter 5
Troubleshooting the CTS 1000
Figure 5-1
troubleshooting tasks.
Figure 5-1
CTS initial setup is also performed using the Hardware Setup fields. For information on how to configure
Note
CTS for the first time, see the
Replacement Unit
Managing Displays
A display is set up successfully when the color on the display has been adjusted for the lighting in the
meeting room.
Each display must be adjusted individually.
Note
Use the information in the following sections to adjust the display for your system:
•
•
•
•
OL-13676-05
shows the Cisco TelePresence System administrative tools available to assist you with
Troubleshooting Window
Guide.
Selecting the Light Level, page 5-4
Adjusting Your Display, page 5-5
Troubleshooting Displays, page 5-5
Related Information, page 5-6
Cisco TelePresence System 1000 Assembly, Use & Care, and Field
Cisco TelePresence System Release 1.6 Administration Guide
Managing Hardware Setup
5-3