Part Code 00622 - HP StorageWorks P9000 Manual

Table 21 Error codes (part code 0605) (continued)
Part Error
Code Number
0605 78055
0605 78056
0605 78057
0605 78058
0605 78060

Part code 00622

Table 22 Error codes (part code 00622)
Part Error
Code Number
00622 105009
00622 105040
00622 105042
00622 105084
00622 105204
00622 105234
00622 105235
00622 105236
00622 105237
00622 105238
00622 105239
00622 105240
50 Message (part code group 0nnn)
Error Message
You do not have a permission to treat
the external volumes composing the
specified external path groups.
You do not have a permission to treat
the external volumes using the specified
WWNs.
You do not have a permission to treat
the specified LDEVs.
You do not have a permission to treat
the LDEVs that are included in the
specified external volumes.
The cache mode cannot be changed
because the specified external volume
includes the LDEVs in the pool where
internal and external volumes coexist.
Error Message
All the check boxes are cleared.
[Detail] is clicked without selecting any
row.
[Delete] is clicked without selecting any
row.
The setting cannot be changed, because
an invalid value has been input.
A necessary program product is not
installed, or insufficient permissions to
execute editorial operation.
A radio button is not selected.
The operation cannot be done because
no row is selected.
The operation cannot be executed
because no target item is selected.
External path group creation has not
finished yet.
Failed to allocate a Parity Group ID.
The number of alternate paths that can
be set to an external volume exceeds the
maximum.
Failed to allocate an External Path Group
ID.
Recommended Action
Verify the available parity groups.
Verify the available parity groups.
Verify the available LDEVs.
Verify the available LDEVs.
Release the allocation of the pool in
which internal and external pools coexist
if there is a volume whose cache mode
cannot be changed.
Recommended Action
Check the check boxes for the items that
you want to change, then retry the
operation.
Select one or more table rows.
Select one or more table rows.
Check the setting(s).
Install a necessary program product.
Otherwise, execute the operation with
the user ID who has a permission to
execute editorial operation, or permit the
user to enable the operation.
Check the setting(s).
Select one or more table rows.
Set a target to be operate on the selected
table, then execute the operation.
Create an external path group.
Check the setting(s).
Check the number of selected alternate
paths.
Check the number of registered external
path groups.
Severity
Level
W
W
W
W
W
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W