Part Code 7007; Part Code 7010 - HP StorageWorks P9000 Manual

Part code 7007

Table 60 Error codes (part code 7007)
Part Error
Code Number
7007 6012
7007 71 1 1

Part code 7010

Table 61 Error codes (part code 7010)
Part Error
Code Number
7010 51 15
7010 51 16
7010 51 17
7010 51 18
7010 51 19
7010 5120
7010 5121
7010 5122
7010 5123
7010 5124
7010 5125
7010 5126
7010 5127
7010 6504
7010 6505
250 Message (part code group 7nnn)
Error Message
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
Error Message
The volume of S-VOL is different from
specified P-VOL.
You cannot create another L1 pair,
because the number of L1 pairs exceeds
the maximum.
No MU number is available.
The MU number was not selected.
No P-VOL is selected.
No S-VOL is selected.
The data has been changed. If you select
another tab (page), the settings will be
discarded. Are you sure you want to
continue?
No data has been changed.
The password is invalid.
You cannot select more than one
operation at a time.
No target volume is selected.
You cannot create another L2 pair,
because the number of L2 pairs exceeds
the maximum.
The specified MU number is invalid.
Select another MU number.
The number of L1 pairs exceeds the
maximum.
The number of L2 pairs exceeds the
maximum.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Recommended Action
Check the capacity of P-VOL and S-VOL.
Specify a volume with the same capacity,
and retry the operation.
You cannot create L1 pair for the
specified P-VOL. Delete the created L1
pair, and retry the operation.
You cannot create the specified pair.
Check the possible number of pairs to
be created.
Select MU number.
Select P-VOL, and operate.
Select S-VOL, and operate.
Apply the data in the Preview list. To
stop the transaction, click [OK] and
continue the operation.
Go on to the next operation.
Check the password.
Multiple volumes cannot be processed
in the operation. Process one volume at
a time.
Select the target volume.
You cannot create L2 pair for the
specified P-VOL. Delete the created L2
pair, and retry the operation.
Select the other MU number.
You cannot create L1 pair for the
specified P-VOL. Delete the created L1
pair, and retry the operation.
You cannot create L2 pair for the
specified P-VOL. Delete the created L2
pair, and retry the operation.
Severity
Level
E
E
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W