HP StorageWorks P9000 Manual page 48

Table 21 Error codes (part code 0605) (continued)
Part Error
Code Number
0605 66722
0605 66724
0605 66736
0605 66739
0605 66742
0605 66744
0605 66748
0605 66749
0605 66750
0605 66751
0605 66752
0605 66747
0605 66798
0605 66799
0605 68730
0605 68733
0605 68735
0605 68741
0605 68742
0605 68800
48 Message (part code group 0nnn)
Error Message
CacheMode is invalid.
InflowControl is invalid.
It is not set within the range where LDKC
can be used.
It is not set within the range where CU
can be used.
It is not set within the range where LDEV
can be used.
It is not set within the range where LDEV
capacity can be used.
A value different from SSID that has
already been set is specified.
The number of paths has reached the
maximum number.
The specified WWN is not registered.
The specified WWN has already been
specified.
The specified external volume is a
volume of the storage system that cannot
be used as an external storage.
The value of SSID is not set within the
available range.
Specified WWN was not found.
Specified external volume was not found.
The Snapshot Pool-VOL is included in the
items.
The volumes registered in a Thin
Provisioning Pool are included in the
items to be maintained.
A volume used as system disk is included
in the items to be maintained.
The Disconnect External Storage Systems
or the Disconnect External Volumes
cannot be executed for an external
volume that includes Pool VOLs
registered in the pool that has the
association with a normal Thin
Provisioning volume.
Set the same cache mode to all the
volumes that compose a Pool VOL.
Volume migration or Quick Restore is in
progress.
Recommended Action
Check the setting of CacheMode.
Check the setting of InflowControl.
Check the setting of LDKC.
Check the setting of CU.
Check the setting of LDEV.
Check the setting of LDEV capacity.
Check the setting of SSID.
Check the setting of path.
Check the specified WWN.
Excluding the overlapping setting, then
retry the operation.
Check the type of the storage system.
Check the setting of SSID.
Check the specified WWN.
Check the specified external volume.
Delete all the pairs and the Pools that
belong to Snapshot Pool-VOL, then retry
the operation.
Delete the Thin Provisioning Pool in
which the volume included in the items
to be maintained is registered, then retry
the operation.
Restore the blocked status of the system
disk. If the status cannot be restored,
please contact HP Technical Support.
Change the status of the associated Thin
Provisioning volume to blocked, then
retry the operation.
If there is a volume whose cache mode
cannot be changed due to its bind mode
setting, release the bind mode setting
first.
Wait for the migrating volume or the
Quick Restore to be completed, then retry
the operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W