HP StorageWorks P9000 Manual page 279

Table 65 Error codes (part code 8105) (continued)
Part Error Error Message
Code Number
8105 5061 The number of lines is invalid.
8105 5062 The size of the CSV file is invalid.
8105 551 1 Configuration File Loader is not installed.
8105 5566 An error occurred during SVP
processing. If this problem persists,
please contact HP Technical Support.
8105 5650 The length of the letter string is invalid.
8105 5651 The number of lines is invalid.
8105 5652 The size of the CSV file is invalid.
8105 5660 The Thin Provisioning volume is not
associated with a pool. Associate the
Thin Provisioning and a pool first.
8105 5700 The file format is invalid.
8105 5701 The header is invalid.
8105 5702 There is no tag.
8105 5705 Configuration File Loader is not installed.
8105 5710 The specified CHA does not exist.
8105 571 1 The specified port does not exist.
8105 5712 The numbers specified for CU and LDEV
(CU: LDEV) are invalid.
8105 5720 You set the same tag name more than
once.
8105 5721 The parameter is invalid.
8105 5730 Duplicate definition error.
8105 5731 The current information is invalid.
8105 5740 There is a difference between the current
CHA and the specified CHA.
8105 5741 There is a difference between the current
port and the specified port.
8105 5742 The setting cannot be performed,
because an invalid Channel Speed value
is set to the specified port.
8105 5743 There is a difference between the current
CU:LDEV and the specified CU:LDEV.
8105 5744 The command device security switch
cannot be turned on because this is not
command device.
8105 5745 The security switch on the port is off. Turn
on the switch.
8105 5746 The group ID is invalid.
Recommended Action
The CSV file can have up to 70,000
lines.
Check the CSV file.
Install Configuration File Loader.
If this problem persists, please contact
HP Technical Support.
One line can have up to 127 letters.
The spreadsheet can have up to 70,000
lines.
Check the CSV file.
Associate the Thin Provisioning volume
with a pool, then retry the operation.
Enter the text file.
Check the version information of the first
row.
Write at least one tag.
Install the Configuration File Loader.
Correct the name of CHA.
Correct the name of the port.
Correct the numbers for CU and LDEV
(CU: LDEV).
Define each tag once in a sheet.
Correct the invalid parameter.
Write one definition only in each tag.
Correct the current information.
Correct the name of the CHA.
Correct the name of the port.
The Channel Speed value is invalid.
Specify a correct value.
Correct the CU and LDEV.
Turn on the command device switch.
Turn on the security switch on this port.
Correct the group ID.
Severity
Level
E
E
W
E
W
W
W
E
E
E
E
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 8105 279