Part Code 3010 - HP StorageWorks P9000 Manual

Table 31 Error codes (part code 3005) (continued)
Part Error
Code Number
3005 78062
3005 78063
3005 78064
3005 78065
3005 78067
3005 78075
3005 78076
3005 78077
3005 78078
3005 78107

Part code 3010

Table 32 Error codes (part code 3010)
Part Error
Code Number
3010 1046
Error Message
Failed to delete the pool.
Pools cannot be deleted when they are
in the following status:
Pairs of Snapshot are remaining.
Volumes of Thin Provisioning are
remaining.
Failed to delete the pool.
Pools cannot be deleted when the pool
volumes of the specified pool is being
formatted.
Failed to delete the pool volume
because the specified pool volume had
one of the following problems.
It is not a pool volume.
The pool volume is not set to the
specified pool.
The LDEV ID of the specified pool
volume is invalid.
The maintenance operation cannot be
performed on the specified V-VOLs
because the V-VOLs include blocked
pool volumes.
The current microcode version does not
support the specified operation.
The operation cannot be done because
the specified V-VOL is online from an
EAV unsupported OS.
The operation cannot be done because
the specified V-VOL is used for
Compatible XRC.
The operation cannot be done because
the specified V-VOL is used for
Compatible FlashCopy.
An internal volume and an external
volume cannot be set as pool VOLs in
the specified pool.
Error Message
The number of Cache Residency settings
has exceeded the maximum number of
available Cache Residency areas.
Recommended Action
Delete the following pairs or volumes if
any, then retry the operation.
Snapshot pairs
Thin Provisioning volumes
Retry the operation after the formatting
is completed.
Specify a pool volume, or, specify a pool
volume that is set to the specified pool,
then retry the operation.
Check the LDEV ID of the pool volume,
then retry the operation.
Restore the blocked pool VOLs.
Please contact HP Technical Support.
Set the specified LDEV to OFFLINE.
Release the Compatible XRC setting, and
then retry the operation.
Release the Compatible FlashCopy
setting, and then retry the operation.
Verify the pool VOLs to be set in the
specified pool.
Recommended Action
Reduce the number of Cache Residency
settings, then retry the operation.
Severity
Level
W
W
W
W
W
E
W
W
W
W
Severity
Level
W
Part code 3010 91