HP StorageWorks P9000 Manual page 102

Table 36 Error codes (part code 3205) (continued)
Part Error
Code Number
3205 65740
3205 65794
3205 65795
3205 66013
3205 66014
3205 66503
3205 66504
3205 66505
3205 66506
3205 66508
3205 66510
3205 66512
3205 66520
3205 66747
3205 66748
3205 68725
3205 68726
3205 68728
3205 68735
102 Message (part code group 3nnn)
Error Message
The configuration changing processes
are conflicting at DKC.
The specified V-VOL is not mounted.
The specified V-VOL has already been
specified.
The specified emulation type cannot be
set because 3390-3R is set in the storage
system.
The specified emulation type cannot be
set because 3390-3 is set in the storage
system.
LDKC, CU, and LDEV are not set within
the range where they can be used.
Specified LDKC:CU:LDEV has already
been used.
The specified LDEV number has already
been assigned to another emulation
group within the range grouped by 32
LDEV numbers.
Specified SSID has already been used.
The specified LDEV capacity is invalid.
The specified emulation type cannot be
used.
Specified CLPR is not mounted.
Mainframe volume and intermediate
volume cannot be set because the
package for mainframe system is not
mounted.
The value of SSID is not set within the
available range.
A value different from SSID that has
already been set is specified.
The shared memory for the V-VOL
management area is insufficient.
The capacity of Thin Provisioning volume
(V-VOL) is invalid.
The pool is in an abnormal state.
A volume used as system disk is included
in the items to be maintained.
Recommended Action
Check if the configuration changing
process by RAID Manager, Auto LUN,
or Quick Restore is not in the operation,
then retry the operation.
Check the specified V-VOL.
Exclude the duplicated setting, then retry
the operation.
Change the emulation type to be set in
the volume.
Change the emulation type to be set in
the volume.
Check the setting of LDKC, CU, and
LDEV.
Check the setting of LDKC, CU, and
LDEV.
Check the setting of emulation groups
within the range grouped by 32LDEV
numbers.
Check the setting of SSID.
Check the setting of LDEV capacity.
Check the setting of emulation type.
Check the setting of CLPR.
Check the mounted packages.
Check the setting of SSID.
Check the setting of SSID.
Delete unnecessary Thin Provisioning
Pools (THP) and Thin Provisioning
volumes (V-VOL), then retry the
operation. If this problem persists, please
contact HP Technical Support.
Check the capacity of Thin Provisioning
volume (V-VOL).
Recover the pool, then retry the
operation.
Restore the blocked status of the system
disk. If the status cannot be restored,
please contact HP Technical Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W