HP StorageWorks P9000 Manual page 235

Table 59 Error codes (part code 7005) (continued)
Part Error Error Message
Code Number
7005 8517 The number of S-VOL cylinders exceeds
the maximum.
7005 8518 You cannot create a pair because the
track format is different.
Make sure that the specified emulation
type is the same for both.
7005 8519 Volumes specified as P-VOL and S-VOL,
or those constituting LUSE are not
consistent in capacity.
7005 8520 You cannot set a pair, because the
volume type is different for each.
7005 8521 The number of multiple copy jobs
exceeded the maximum.
7005 8522 The emulation type of the P-VOL is not
supported.
7005 8523 The emulation type of the S-VOL is not
supported.
7005 8524 The emulation type is not supported.
7005 8525 An internal logic error occurred.
7005 8526 An internal logic error occurred.
7005 8527 An internal logic error occurred.
7005 8528 An internal logic error occurred.
7005 8529 An internal logic error occurred.
7005 8530 An internal logic error occurred.
7005 8531 An internal logic error occurred.
7005 8532 The command has been rejected,
because the P-VOL or the S-VOL is being
used by the host.
7005 8533 The command has been rejected,
because the emulation type of the
specified volume is not supported or the
specified S-VOL is used as a data volume
of Continuous Access Journal.
7005 8535 A processor failure was detected.
7005 8536 A cache failure was detected.
Recommended Action
Check the contents, and retry.
Check if the specified emulation type is
the same or not.
Select volumes with the same capacity.
When specifying LUSE volumes as P-VOL
and S-VOL, the capacity of each volume
constituting the LUSE volumes must be
the same.
Specify the volume of the same emulation
type, and retry the operation.
Check the contents, and retry.
Specify the emulation type supported in
HOMRCF.
Specify the emulation type supported in
HOMRCF.
Specify the emulation type supported in
HOMRCF.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Stop the usage by the host.
Specify a volume of the supported
emulation type. When the S-VOL is used
as a data volume of Continuous Access
Journal, the command cannot be
executed in the current status of
Continuous Access Journal pair.
See the section "Sharing Business Copy
volumes" in the HP StorageWorks P9000
Business Copy User Guide for the
relation between the status of Continuous
Access Journal pair and the Business
Copy operations.
Please contact HP Technical Support.
Please contact HP Technical Support.
Severity
Level
W
W
W
W
W
W
W
W
E
E
E
E
E
E
E
W
W
E
E
Part code 7005 235