HP StorageWorks P9000 Manual page 69

Table 26 Error codes (part code 01022) (continued)
Part Error Error Message
Code Number
01022 107005 The process cannot continue due to
internal logic contradiction.
01022 107006 The type of the specified port is not fibre
port.
01022 108003 The volume, which is allocated as LDEV
in the target path information, is set as
reserved by Data Retention.
01022 108004 The volume, which is allocated as LDEV
in the path information that is set under
the target host group, is set as reserved
by Data Retention.
01022 108005 There is a volume, which is set as
reserved by Data Retention, in the target
path information.
01022 108006 The specified LDEV is a reserved volume
of Data Retention.
01022 108007 The specified LDEV is set other than the
Read/Write (S-VOL enabled) of Data
Retention.
01022 108008 The specified LDEV is a emulation type
other than the OPEN system.
01022 108009 The specified LDEV is a reserved volume
of Auto LUN.
01022 108010 The specified LDEV is a system disk.
01022 10801 1 The specified LDEV is a journal volume
of Continuous Access Journal.
01022 108012 The specified LDEV is a pool volume.
01022 108013 The specified LDEV is a V-VOL.
01022 108014 The specified LDEV is a remote command
device.
01022 108015 The selected LDEV has been set as a
quorum disk volume.
01022 108016 The specified LDEV is a reserved volume
of Data Retention.
01022 108017 The specified LDEV is neither OPEN
Volume nor Mainframe intermediate
volume.
01022 108018 The specified LDEV is not a top volume
of the LUSE volume.
01022 108025 The specified port is neither Target nor
RCU Target.
01022 108026 The host mode of the specified host
group is "4C." Only a External Storage
volume can be specified.
Recommended Action
Retry the operation. If the same problem
occurs again, close the windows, refresh
it, then retry again. If the same problem
persists despite retrying, please contact
HP Technical Support.
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Severity
Level
E
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 01022 69