HP StorageWorks P9000 Manual page 148

Table 50 Error codes (part code 6005) (continued)
Part Error
Code Number
6005 8788
6005 8789
6005 8790
6005 8791
6005 8792
6005 8793
6005 8794
6005 8795
148 Message (part code group 6nnn)
Error Message
The specified expanded volume in the
RCU is not defined.
Combination of the specified expansion
volumes is not valid.
The specified expansion volume
(Port/GID/LUN) of the RCU is not
usable.
The specified M-VOL is still online from
another HOST.
The operation failed because the
Volume Retention function was not
installed in the specified RCU.
Install Volume Retention, and retry the
operation.
The Continuous Access Synchronous
function is not installed in the specified
controller(s).
The Continuous Access Synchronous
function is not installed in the specified
controller(s).
The operation failed because the
specified M-VOL applied to any of the
following:
A T-VOL of Business Copy Z which
is not in the Split pair (PSUS) status.
An S-VOL of Business Copy which
is not in the Split pair (PSUS) status.
A reserved volume of Business Copy
Z or Business Copy.
A volume used in Business Copy Z
or Business Copy in Reverse Copy
status.
A T-VOL of Compatible FlashCopy.
A FICON(R) Data Migration Source
Volume.
Recommended Action
Check the Port, GID and
LUN settings of the RCU.
The combination of the
specified volumes for LUN
Expansion is not valid.
Verify the parameters and
retry the operation.
Confirm the status of the
specified expansion volume
and microcode version of
the RCU.
Vary the concerned path
offline from the other host,
then retry the operation.
Install the Volume Retention
in the MCU and the RCU,
then retry the operation.
Install Continuous Access
Synchronous in the MCU
and the RCU, then retry the
operation.
Install Continuous Access
Synchronous in the MCU
and the RCU, then retry the
operation.
Check the status of the
specified M-VOL from the
host or the SVP.
Severity Level
W
W
W
W
W
W
W
W