HP StorageWorks P9000 Manual page 241

Table 59 Error codes (part code 7005) (continued)
Part Error Error Message
Code Number
7005 8640 The command has been rejected,
because the pair sharing the P-VOL was
in the Reverse Copy or Quick Restore
status.
7005 8641 The L1 pairs contain a pair in the
Reverse Copy or Quick Restore status.
7005 8642 The command has been rejected,
because the specified S-VOL is shared
as the P-VOL of the other pair and the
pair is in the COPY(RS-R) status.
7005 8643 The Pairresync operation has been
rejected, because the specified pair is
not in the state of PSUS.
7005 8644 The command has been rejected,
because the pair status is not PSUS or
PSUE.
7005 8645 The Reverse Copy command was
rejected because the P-VOL was shared
with the S-VOL of a remote copy pair.
7005 8646 The Reverse Copy request was rejected,
because the P-VOL was shared with a
Remote Copy pair in the non-suspend
status.
7005 8647 The Reverse Copy command was
rejected because the S-VOL was shared
with the P-VOL of a remote copy pair.
7005 8648 The boot device and the P-VOL do not
match in the Paircreate command.
7005 8649 Because the boot device is the S-VOL in
the Pairsplit-S command, the flag does
not match.
7005 8650 The boot device and the P-VOL do not
match in the Paircreate, Pairresync, or
Pairsplit-S command.
7005 8651 The SSID is invalid.
7005 8652 The boot device is not a P-VOL nor
S-VOL.
7005 8653 Because the boot device is the P-VOL in
the Pairsplit-S command, the flag does
not match.
Recommended Action
Wait until Reverse Copy or Quick
Restore completes.
Wait until Reverse Copy or Quick
Restore completes.
Wait until the status of the pair sharing
the P-VOL becomes PAIR, then retry the
operation.
See the section "Operations permitted
for L1, L2 pairs" in the HP StorageWorks
P9000 Business Copy User Guide for
the relation between the status of pairs
and Business Copy operations.
The Pairresync operation cannot be
executed in the current pair status.
See the section "Resynchronize pairs" in
the HP StorageWorks P9000 Business
Copy User Guide for the relation
between the state of pairs and the
Business Copy operations.
Check the pair status.
Release the remote copy pair, and then
retry the operation.
Delete the Remote Copy pair.
Release the remote copy pair, and then
retry the operation.
Check the specified volume number.
Check the specified volume number.
Check the target volume number.
Check the contents, and retry.
Check the target volume number.
Check the target volume number.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 7005 241