HP StorageWorks P9000 Manual page 77

Table 30 Error codes (part code 2010) (continued)
Part Error Error Message
Code Number
2010 5054 More than 36 volumes cannot be
combined to form an LUSE.
2010 5055 The size of the LUSE volume exceeds
64,424,505,600 KB.
2010 5056 The specified LDEV is inaccurate.
2010 5812 Are you sure you want to perform the
LUSE operation on a volume that has a
path definition?
2010 5815 There are no LUSE volumes that can be
reset. Check the specified volumes.
2010 9010 The specified volumes will be expanded
to LUSE volume. All data in each LDEV
will be initialized. Do you want to
continue?
2010 9060 The specified LUSE volume will be
released. All data in the volume will be
destroyed. Do you want to continue?
2010 9355 The specified volumes will be expanded
to LUSE volume. Do you want to
continue?
2010 9358 The selected LUSE volume will be reset.
Do you want to continue?
2010 55007 Are you sure you want to perform the
LUSE operation using volumes that have
different CLPR numbers?
2010 551 12 The LUSE volume configuration cannot
be released because a path is set to the
LUSE volume. Delete the path, and then
release the LUSE volume configuration.
Recommended Action
Check the content of the operation.
Follow the correct operation procedure.
Follow the correct operation procedure.
Click [OK] to continue the operation.
Click [Cancel] to stop the operation.
Specify the LUSE displayed in blue bold
italic characters.
To continue processing, click [OK]. To
stop processing, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
To continue this operation, click [OK].
To cancel this operation, click [Cancel].
Delete the path set to the LUSE volume,
then retry the operation.
Severity
Level
W
W
W
W
W
i
W
i
i
i
W
Part code 2010 77