HP StorageWorks P9000 Manual page 145

Table 50 Error codes (part code 6005) (continued)
Part Error Error Message
Code Number
6005 8749 Specified R-VOL is still online from
HOST.
6005 8751 Remote Copy is not supported under
the RCU controller emulation type.
6005 8753 An internal error occurred.
6005 8754 Invalid MCU serial number or MCU
SSID.
6005 8755 The serial number, SSID or CU number
of the RCU is invalid.
6005 8756 MCU disk array cache is not active.
6005 8757 One side of the Cache or shared
memory on the MCU is blocked.
6005 8758 Unexpected error on MCU.
6005 8759 RCU Subsystem Cache status is not
active.
6005 8760 M-VOL and R-VOL Track Formats do not
match.
Recommended Action
Check if the input number of
R-VOL is correct. If not, enter
the correct R-VOL number. If
the number is correct, vary
the specified path offline.
Confirm the RCU controller
emulation type.
Please contact HP Technical
Support.
Check the serial number or
SSID of MCU, then retry with
correct parameter.
Check the serial number,
SSID or CU number of the
RCU, and retry the operation
with correct parameters.
Check the connection LCP
ports of the RCU. Connect
the path correctly, and retry
the operation
Check the storage system
cache status of the MCU
from the host. If it is off, set
it on and retry. If it cannot
be set on, please contact HP
Technical Support.
There is an invalid cache or
shared memory status on the
MCU. Check the status and
recover the cache or shared
memory, then retry the
operation.
Please contact HP Technical
Support.
Please contact HP Technical
Support.
Check the track formats of
the specified M-VOL and
R-VOL.
Severity Level
W
W
E
W
W
W
E
E
W
W
Part code 6005 145