HP StorageWorks P9000 Manual page 199

Table 53 Error codes (part code 6505) (continued)
Part Error Error Message
Code Number
6505 58596 The operation to change the status to the
status ready for Delta resync failed
because At-Time Split was set to the
specified restore journal.
6505 58597 Journals cannot be added to the
extended consistency group (EXCTG),
because the controller ID of the specified
serial number is invalid.
6505 58600 Journals cannot be added to the
extended consistency group (EXCTG),
because Continuous Access Journal Z
function or Disaster Recovery Extended
function is not installed.
6505 58601 Journals cannot be added to the
extended consistency group (EXCTG),
because the additional shared memory
is not installed.
6505 58602 Journals cannot be added to the
extended consistency group (EXCTG),
because the number of storage systems
in the EXCTG exceeds the maximum.
6505 58603 Journals cannot be added to the
extended consistency group (EXCTG),
because the number of journals in the
EXCTG exceeds the maximum.
6505 58604 The specified journal is already
registered in the extended consistency
group (EXCTG).
6505 58605 Journals cannot be added to the
extended consistency group (EXCTG),
because the specified mirror ID is
different from the mirror ID existed in the
EXCTG.
6505 58606 Journals cannot be deleted from the
extended consistency group (EXCTG),
because the specified EXCTG is not
registered.
6505 58607 Journals cannot be deleted from the
extended consistency group (EXCTG),
because the specified journal is not
registered.
6505 58608 The Resume Pair operation failed.
Although the restore journal belongs to
an extended CT group (EXCTG), the
primary storage system does not support
the EXCTG function.
6505 58609 The timer type cannot be changed,
because the specified journal belongs to
an extended consistency group (EXCTG).
6505 58610 The parameter specified in the extended
consistency group (EXCTG) operation is
invalid.
Recommended Action
Check if the At-Time Split is set to the
specified restore journal with Business
Continuity Manager.
Check the controller ID of the specified
serial number.
Confirm that the Continuous Access
Journal Z function and the Disaster
Recovery Extended function are installed
in the storage system.
Please contact HP Technical Support and
install additional shared memory.
Check the number of storage systems in
the specified extended consistency group
(EXCTG).
Check the number of journals in the
specified extended consistency group
(EXCTG).
Check the number of journals in the
specified extended consistency group
(EXCTG).
Check the mirror ID of the specified
extended consistency group (EXCTG).
Check the status of the specified
extended consistency group (EXCTG).
Check the journals in the specified
extended CT group.
Update the microcode of the primary
storage system to the version which
supports the EXCTG function.
Check if the specified journal belongs to
an extended consistency group (EXCTG).
Refresh the window, then retry the
operation. If this problem persists, please
contact HP Technical Support.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 6505 199