HP StorageWorks P9000 Manual page 111

Table 39 Error codes (part code 4005) (continued)
Part Error Error Message
Code Number
4005 55245 The number of cache residency areas set
for the CLPR exceeds the maximum
available number of cache residency
areas.
CLPR No:%s
4005 55246 The total number of Cache Residency
areas set for the CLPRs and the maximum
number of the Cache Residency areas
in the subsystem are not equal.
4005 55247 The cache residency size set for the CLPR
is not a multiple of 512 MB.
CLPR No:%s
4005 55265 The parity group that contains the
volume(s) to which Cache Residency is
set cannot be migrated to another CLPR.
Please remove the Cache Residency
settings from the volumes, and then
migrate the parity group.
CLPR No:%s
The parity group that contains the
volume(s) to which Cache Residency is
set cannot be migrated to another CLPR.
4005 55530 An error occurred during SVP
processing.
4005 55531 An error occurred during SVP
processing.
4005 55532 The specified extent is over the size
which can be specified.
4005 55533 An error occurred during SVP
processing.
4005 55534 An error occurred during SVP
processing.
4005 55535 An error occurred during SVP
processing.
4005 55536 An error occurred during SVP
processing.
4005 55537 An error occurred during SVP
processing.
4005 55538 Cache Residency cannot be set to the
specified volume because the IO
Suppression mode is set to Enable.
4005 55539 Cache Residency cannot be set to this
volume because its cache mode is set to
Disable.
Recommended Action
Check the settings, then retry the
operation.
Check the settings, then retry the
operation.
Check the settings, then retry the
operation.
Check the settings, then retry the
operation.
Remove the Cache Residency settings
from the volumes, and then migrate the
parity group.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Set the extent area within the size which
can be specified, then retry the
operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Disable the IO Suppression mode of this
volume, then retry the operation, or
remove the volume from the volumes to
be set.
Enable the cache mode of this volume,
and then retry the operation, or remove
the volume from the volumes to be set.
Severity
Level
W
W
W
W
E
E
W
E
E
E
E
E
W
W
Part code 4005 1 1 1