HP StorageWorks P9000 Manual page 56

Table 25 Error codes (part code 1005) (continued)
Part Error
Code Number
1005 1021
1005 1022
1005 1023
1005 1024
1005 1025
1005 1059
1005 1061
1005 1063
1005 1064
1005 1065
1005 1066
1005 1067
1005 1068
56 Message (part code group 1nnn)
Error Message
Invalid host mode.
Invalid host mode.
Invalid Fibre address.
Invalid Fibre topology information.
The specified LU path does not exist.
LUN security setting has been made to
a non-Fibre port. LUN security is a
function of LUN Manager.
Security Switch Off operation and path
adding operation cannot be performed
simultaneously.
The specified WWN is already in use.
You are trying to register the same
WWN that is already registered.
The specified host name or the host
group name is already registered. (The
host name and the host group name
cannot be the same.)
WWN number, which is not registered,
is specified. (When deleting, or
changing)
You are trying to register the same host
group number as the already registered
one.
The specified host group has not been
registered.
Recommended Action
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
Check the specified contents, then retry
the operation.
First, add paths, then click Apply. Next,
turn off the security switch, then click
Apply.
Check the specified contents, then retry
the operation.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
Correct the specified contents, and
request the setting of the configuration
information again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
The configuration information has been
changed already. Check the settings,
and request the configuration information
setting again.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W