HP StorageWorks P9000 Manual page 263

Table 62 Error codes (part code 7105) (continued)
Part Error Error Message
Code Number
7105 58261 The command has been rejected,
because the specified S-VOL is used as
R-VOL of Continuous Access Synchronous
Z pair.
7105 58262 A pair cannot be created because
shared memory for differential tables is
insufficient.
7105 58299 The operation failed because the
specified S-VOL was a data volume of
Continuous Access Journal Z.
Check the requirements for using the
volume with Continuous Access Journal
Z.
7105 58300 The operation failed because the
specified T-VOL was a data volume of
Continuous Access Journal Z.
7105 58301 The reserve volume setting failed
because the specified volume was a data
volume of Continuous Access Journal Z.
7105 58351 The Quick Restore command has been
rejected because the specified pair
contains external volumes, and also is
used as a Continuous Access Journal Z
pair.
7105 58356 The command was rejected because the
specified volume was used by
Continuous Access Journal Z and
Continuous Access Synchronous Z.
7105 58451 The disk subsystem is in internal process.
Please retry the operation.
7105 58518 The operation failed, because the
Snapshot pair(s) existed.
7105 58519 The operation failed, because the
Snapshot pair(s) existed.
7105 58520 The operation failed, because different
versions of microcodes coexisted in the
disk subsystem.
7105 58533 The operation failed, because the
specified S-VOL was a journal volume.
7105 58534 The operation failed, because the
specified T-VOL was a journal volume.
7105 58535 The reserve volume setting failed
because the specified volume was a
journal volume.
Recommended Action
The requested command cannot be
executed in the current status of
Continuous Access Synchronous Z pair.
See the section "Sharing Business Copy
Z volumes" in the HP StorageWorks
P9000 Business Copy for Mainframe
Systems User Guide for the relation
between the state of Continuous Access
Synchronous Z pair and the Business
Copy Z operations.
Please add sufficient shared memory to
create a pair.
Check the requirements for using the
volume with Continuous Access Journal
Z.
Release the Continuous Access Journal
Z setting or specify another volume.
Release the Continuous Access Journal
Z setting or specify another volume.
Delete the Continuous Access Journal Z
pair or execute the operation by other
pairs.
To continue the operation, release the
Continuous Access Journal Z pair or the
Continuous Access Synchronous Z pair,
and then retry the operation.
If the problem persists despite retrying,
please contact HP Technical Support.
To continue the operation, delete all
Snapshot pair(s) and retry.
To continue the operation, delete all
Snapshot pair(s) and retry.
Replace the microcode, then retry the
operation.
Release the journal volume setting or
specify another volume.
Release the journal volume setting or
specify another volume.
Release the journal volume setting or
specify another volume.
Severity
Level
W
E
W
W
W
i
i
W
W
W
E
W
W
W
Part code 7105 263