HP StorageWorks P9000 Manual page 94

Table 33 Error codes (part code 03022) (continued)
Part Error
Code Number
03022 105179
03022 105180
03022 105181
03022 105182
03022 105183
03022 105184
03022 105185
03022 105186
03022 105187
03022 105188
03022 105189
03022 105191
03022 105192
03022 105193
03022 105194
03022 105195
03022 105205
03022 105231
03022 105232
03022 105233
03022 105248
94 Message (part code group 3nnn)
Error Message
An LDEV in Normal or Quick Formatting
status is selected.
The selected LDEV has a reserved volume
setting of Auto LUN.
Quick formatting cannot be executed
because the number of party groups
exceeds 36.
It is not available to change other than
the newly allocated SSIDs.
The same SSID is specified.
Quick formatting cannot be executed
because the number of party groups
exceeds 36.
Pools of different types are specified.
No more V-VOL can be added to the
selected pool.
A pool in the abnormal state is selected.
There is no LDEV ID that can be set in
the selected pool.
An LDEV cannot be added because the
free space in the selected pool is
insufficient.
LDEV that has already been set has been
selected.
LDEV not set has been selected.
The number of data patterns exceeds the
setting range.
An error occurred while formatting.
An error occurred while preparing the
quick format.
Any further, the Pool that selects it cannot
set the volume.
An error occurred in the shredding
processing.
The same SSID is specified.
The specified number of digits for SSID
is incorrect.
The processing cannot continue due to
an internal logical contradiction.
Recommended Action
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Execute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Execute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Check the setting(s).
Execute refresh, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Specify another unused SSID number.
Enter the SSID number with 4 digits.
Execute refresh.
Severity
Level
W
W
E
W
W
W
W
W
W
W
W
E
E
E
E
E
E
E
E
E
E