Part Code 8510 - HP StorageWorks P9000 Manual

Part code 8510

Table 73 Error codes (part code 8510)
Part Error
Code Number
8510 5030
8510 7060
8510 7301
8510 7302
8510 7440
8510 9101
8510 9102
8510 55235
8510 55236
8510 55237
8510 55238
8510 55240
8510 55261
8510 55262
8510 55636
8510 57001
288 Message (part code group 8nnn)
Error Message
The displayed information has not been
changed.
An error occurred in the client logic.
An error occurred in the client logic.
An error occurred in the client logic.
An error occurred during SVP
processing.
Do you want to cancel?
Do you want to apply?
The CLPR name already exists. The CLPR
name will return to the name that is
displayed before you have changed.
The value set for the number of Cache
Residency areas is outside the valid
range. The value will return to the one
set before.
The SLPR name already exists. The SLPR
name will return to the name that is
displayed before you have changed.
Some of the selected ports cannot
migrate to the other SLPR. Please change
the settings.
Some of the selected parity groups
cannot migrate to the other SLPR. Please
change the settings.
The concatenated parity group cannot
be set across multiple CLPRs. Please
select another parity group, and then
retry the operation.
The Parity Group cannot be migrated to
the CLPR that you newly created. Please
apply the tentative settings with no parity
groups to the CLPR that you have
created, and then migrate the parity
group.
The CLPR that has some parity groups
cannot be deleted. Migrate all parity
groups in the CLPR to another CLPR, and
then delete the CLPR.
The partition configuration may contain
some inconsistent information.
To initialize partition configuration, select
the Yes button.
To stop the operation, select the No
button.
Recommended Action
Specify what you want to register, and
then retry the operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
To cancel, click [OK].
Click [OK] to execute the operation.
Change the CLPR name.
Change the settings.
Please contact HP Technical Support.
Please contact HP Technical Support.
Please contact HP Technical Support.
Select another parity group, then retry
the operation.
Apply the tentative settings with no parity
groups to the CLPR that you have
created, then migrate the parity group.
Migrate all parity groups in the CLPR to
another CLPR, then delete the CLPR.
If you clicked [Yes], set the changes
again.
If you clicked [No], retry the operation.
If this problem persists, please contact
the system manager.
Severity
Level
W
E
E
E
E
i
i
W
W
E
E
E
W
W
W
E