Part Code 03122 - HP StorageWorks P9000 Manual

Part code 03122

Table 35 Error codes (part code 03122)
Part Error
Code Number
03122 105264
03122 106005
03122 106006
03122 106007
03122 106008
03122 106009
03122 106010
03122 10601 1
03122 106012
03122 106013
03122 106014
03122 106015
03122 106016
03122 106017
03122 106018
03122 106019
03122 106021
03122 106022
96 Message (part code group 3nnn)
Error Message
The password is invalid.
No more pools can be registered,
because the number of registered pools
has reached the maximum.
The volume that can be set as a pool
volume does not exist.
The setting cannot be performed,
because the number of pools exceeds
the maximum.
The volume to be set as a pool volume
is not selected.
The setting cannot be performed,
because the number of pool volumes that
can be set to a pool exceeds the
maximum.
The specified pool subscription limit
value cannot be set.
The number of prefix characters of the
pool name is invalid.
The specified prefix characters for a pool
name contain an invalid character(s).
The initial number of specified pool
name is not input.
The specified initial number of pool
name contains a character other than
the numerical value.
The specified initial number of pool
name exceeds the maximum.
The number of characters that can be set
for the pool name exceeds the maximum,
or some spaces are set.
The specified pool name is already used.
The specified pool ID is incorrect.
The allocation cannot be done from the
specified pool ID.
The selected volumes cannot be specified
as a pool volume, because the volume
types are different.
The selected volumes cannot be specified
as a pool volume, because the cache
modes of the selected volumes coexist.
Recommended Action
Check the password, then retry the
operation.
Check the support configuration of pools,
then retry the operation.
Check if there is a volume that can be
set as a pool volume, then retry the
operation.
Check the support configuration of pools,
then retry the operation.
Specify the volume, then retry the
operation.
Reduce the number of selected pool
volumes, then retry the operation.
Check the specified value of the
subscription limit, then retry the
operation.
Enter prefix characters with a valid
number for the pool name.
Check the prefix characters of pool
name, then retry the operation.
Check the initial number of pool name,
then retry the operation.
Check the initial number of pool name,
then retry the operation.
Check the initial number of pool name,
then retry the operation.
Check the pool name, then retry the
operation.
Specify another pool name, then retry
the operation.
Check the specified pool ID, then retry
the operation.
Specify a pool ID that is smaller than the
one specified before, then retry the
operation.
Select the same volume type, then retry
the operation.
Specify the volumes that have the same
cache mode, then retry the operation.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W