Part Code 05122 - HP StorageWorks P9000 Manual

Table 44 Error codes (part code 05121) (continued)
Part Error
Code Number
05121 105003
05121 109001
05121 109203
05121 109204
05121 109206
05121 109207
05121 109209

Part code 05122

Table 45 Error codes (part code 05122)
Part Error
Code Number
05122 105101
05122 105102
05122 105103
05122 105104
05122 105105
05122 105106
05122 105107
05122 105108
05122 105109
05122 1051 10
05122 1051 1 1
Error Message
No table row, or two or more table rows
are selected.
Are you sure you want to remove the
selected row(s)?
Are you sure you want to close the
graph?
The graph data will be deleted. Do you
want to continue?
The monitored CUs will be deleted. Do
you want to continue?
The monitored WWNs will be deleted.
Do you want to continue?
The graphs of some performance objects
cannot be displayed in Short-Range
because CUs or WWNs are not set to
be monitored. Do you want to continue?
Error Message
The specified term of displaying graph
is invalid.
The content has not been edited.
The specified HBA WWN is duplicated
in the DKC.
The specified WWN Name is duplicated
in the WWN to be monitored.
There is no editable WWN as a target
of monitoring.
The WWN cannot be added, because
that WWN Name is duplicated in the
WWN to be monitored.
The content has not been edited.
There is no available port to specify.
All the monitoring WWNs are being
used.
A new graph cannot be added, because
the number of graph display objects has
reached the maximum.
No more graph items can be added
because the total number of graph items
that can be displayed in all of the panels
has reached the maximum.
Recommended Action
Select one table row.
To continue the processing, click [OK].
Otherwise, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
To continue processing, click [OK]. To
stop processing, click [Cancel].
When you display the graphs in
Short-Range, set CUs or WWNs to be
monitored in [Edit CU Monitor Mode] or
[Edit WWN Monitor Mode] window.
Recommended Action
Enter a correct value.
Edit the CU to be monitored.
Specify another HBA WWN.
Specify another WWN Name.
Click [OK].
Check the additional WWN, and edit
the duplicated WWN Name.
Edit the WWN to be monitored.
Click [OK].
Click [OK].
Delete the other graph display object,
or close the other graph.
Set the total number of graph items for
all of the graph panels to 16 or less.
Severity
Level
W
W
i
W
W
W
i
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
Part code 05122 1 17