HP StorageWorks P9000 Manual page 150

Table 50 Error codes (part code 6005) (continued)
Part Error
Code Number
6005 8817
6005 8818
6005 8819
6005 8820
6005 8821
6005 8822
6005 8826
6005 8827
150 Message (part code group 6nnn)
Error Message
Preset Suspension is effective in the CT
Group.
Preset Suspension is effective in the CT
Group.
A volume cannot be used as an R-VOL
when:
it is in an intervention-required
condition.
it is in a protection condition.
it is in unusable condition.
it is a secondary volume of Business
Copy or a target volume of Business
Copy Z.
it is a reserved volume of Business
Copy or Business Copy Z.
it is a volume reserved by Auto LUN.
it is used by Continuous Access
Journal Z.
The specified R-VOL is not a permissible
condition of Remote Copy.
The specified R-VOL is not recognizable
from the connection port.
An I/O Error occurred on the R-VOL,
or the R-VOL is in an unusable
condition.
An internal error occurred.
Please wait a few minutes and retry the
Add Pair(Paircreate)/Resume
Pair(Pairresync).
Recommended Action
Cancel the preset suspension
in the CT group, then retry
the operation.
Cancel the preset suspension
in the CT group, then retry
the operation.
Select another volume.
The Continuous Access
Synchronous operation
failed, because R-VOL has
one of the following
conditions:
The volume is blocked.
The volume is under
maintenance.
The volume is copying
data (correction copy or
drive copy).
The volume is in the
correction access
condition.
Verify the configuration of
the specified R-VOL.
Check whether the volume
is in a usable condition. If
the volume is usable, please
contact HP Technical
Support.
Please contact HP Technical
Support.
Retry the operation in a few
minutes.
If this problem persists, select
the volumes where the error
occurred, execute the Delete
Pair (Pairsplit-S) command
with the Force option, then
retry the operation.
Severity Level
i
i
W
W
W
W
E
W