HP StorageWorks P9000 Manual page 81

Table 31 Error codes (part code 3005) (continued)
Part Error Error Message
Code Number
3005 6050 An error occurred during SVP
processing.
3005 6533 An error occurred during SVP
processing.
3005 6537 There is an error in another setting and
the setting processing has not been
executed.
3005 7060 An error occurred during SVP
processing.
3005 71 1 1 An error occurred during SVP
processing.
3005 7310 An error occurred during SVP
processing.
3005 8000 An error occurred during SVP
processing.
3005 8001 A communication time-out error
occurred in the disk subsystem.
3005 8002 An error occurred during SVP
processing.
3005 8100 An error occurred while connecting to
the subsystem.
3005 8102 This function is not supported.
3005 8102 This function is not supported.
3005 8979 The operation of the external volume
has been failed because all the paths
to the external volume are blocked.
3005 55505 The specified operation cannot be
performed, because the Pool-VOL in the
same Pool has been specified to
migrate to a different CLPR.
Pool ID=%s
3005 55506 The specified volume is used as a
reserved volume of Auto LUN.
3005 55507 The specified volume is used as a
command device.
3005 55508 The specified volume has Volume
Security for Mainframe setting.
3005 55509 The specified volume is used as a LUSE
volume.
3005 55510 An error occurred during SVP
processing.
Recommended Action
If nothing changes despite retrying,
contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Check the error factor in the others
settings.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Check whether the DKCMAIN
microprogram version and the SVP
microprogram version are mismatched.
Check whether the DKCMAIN
microprogram version and the SVP
microprogram version are mismatched.
Restore more than one path to the
external volume, and then perform the
operation of the external volume.
Check the setting.
Release the reserved volume setting or
specify another volume.
Release the command device setting or
specify another volume.
Release the Volume Security for
Mainframe setting or specify another
volume.
Release the LUSE volume setting or
specify another volume.
If this problem persists, please contact
HP Technical Support.
Severity
Level
E
E
W
E
E
E
E
E
E
E
E
E
W
W
W
W
W
W
E
Part code 3005 81