HP StorageWorks P9000 Manual page 112

Table 39 Error codes (part code 4005) (continued)
Part Error
Code Number
4005 55540
4005 55541
4005 55542
4005 55576
4005 56542
4005 5851 1
4005 58512
4005 58513
4005 58514
4005 58709
1 12 Message (part code group 4nnn)
Error Message
The specified function is not available
because it requires Open System Array
Management.
The specified function is not available
because it requires Mainframe Array
Management.
An error occurred during SVP
processing.
An LDEV number that does not apply to
the selected CU group has been
specified.
The prestaging is not executed because
the prestaging area does not exist.
Check the Cache Residency setting.
The current Cache Residency setting
cannot be changed because the sidefile
size exceeds the threshold.
The current Cache Residency setting
cannot be changed because the
prestaging operation is in progress.
Please wait for a while, and then retry
the operation.
Prestaging not completed.
Currently running microcode version
does not support the specified operation.
The specified operation cannot be
executed because one of the following
maintenance operations is in progress:
LDEV formatting
Correction Copy
Drive Copy
Changing the CHA/DKA status
Changing the cache status
Replacing an OEM drive microcode
LDEV Shredding or Extent Shredding
Extent Shredding is in progress
Therefore the specified operation cannot
be executed.
Recommended Action
Install the necessary program product.
Install the required program product.
If this problem persists, please contact
HP Technical Support.
Check the setting.
To use the prestaging function, set the
prestaging area by using Cache
Residency.
Wait, then retry the operation.
Wait, then retry the operation.
Wait, refresh the window, then retry the
configuration operation. Or check if
storage system is blocked. If the problem
persists, please contact HP Technical
Support.
Please contact HP Technical Support.
Wait, then retry the operation.
Severity
Level
E
W
E
W
W
W
E
W
E
W