HP StorageWorks P9000 Manual page 97

Table 35 Error codes (part code 03122) (continued)
Part Error Error Message
Code Number
03122 106023 The selected volumes cannot be specified
as a pool volume, because different
CLPRs selected coexist.
03122 106024 The operation cannot be executed,
because the specified pool is blocked.
03122 106025 The operation cannot be executed,
because the specified pool is blocked.
03122 106026 The operation cannot be executed,
because the pool volume is blocked.
03122 106027 The operation cannot be executed,
because the pool usage exceeds the
threshold.
03122 106028 The operation cannot be executed,
because the specified pool is in shrinking
operation.
03122 106029 The operation cannot be executed,
because the specified pool is in Normal
status.
03122 106030 The operation cannot be executed,
because the specified pool is associated
with a Thin Provisioning volume.
03122 106031 The operation cannot be executed,
because the specified pool is being used.
03122 106032 The operation cannot be executed,
because the specified pool is not in
shrinking operation.
03122 106033 The operation cannot be executed,
because the specified pool is defined as
the pool of Snapshot.
03122 106034 The shrinking operation cannot be
performed on the specified pool because
the usage rate after shrinking becomes
higher than the highest threshold set
among the depletion threshold, the
warning threshold, and the system
threshold.
03122 106035 The operation cannot be executed,
because the top pool volume has been
selected.
03122 106036 The operation cannot be executed,
because the specified pool volumes
contain an abnormal pool volume.
03122 106037 The setting cannot be executed, because
the specified pool has no free space.
03122 106038 No table row, or two or more table rows
are selected.
Recommended Action
Specify the volumes that have the same
CLPR, then retry the operation.
Restore the status of the pool, then retry
the operation.
Delete the pool.
Restore the status of the pool volume,
then retry the operation.
Check the usage rate of the pool, then
retry the operation.
Stop the shrinking operation on the pool,
then retry the operation.
Check the status of the pool, then retry
the operation.
Delete the associated Thin Provisioning
volume, then retry the operation.
Check the pool usage, then retry the
operation.
Check the status of the pool.
Check the pool type.
Check the setting of pool capacity, pool
usage, depletion threshold, warning
threshold, and system threshold, then
retry the operation.
Select a volume other than the top pool
volume.
Check the state of the specified pool
volumes, then retry the operation.
Execute any of the following actions,
then retry the operation.
Increase the pool capacity by adding
pool volume(s).
Reduce the pool usage.
Select one table row.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 03122 97