HP StorageWorks P9000 Manual page 239

Table 59 Error codes (part code 7005) (continued)
Part Error Error Message
Code Number
7005 8600 The RAID level of the specified volume
is not supported.
7005 8601 The specified P-VOL cannot be paired
with a backup server volume.
7005 8602 The command has been rejected,
because the specified P-VOL has already
been used as S-VOL of the other pair.
7005 8605 The Pairresync command was issued to
a device in the SMPL status.
7005 8606 The operation to create L2 pair has been
rejected, because the P-VOL of L1 pair
is used as the P-VOL of Continuous
Access Synchronous pair.
7005 8607 The command has been rejected,
because the specified S-VOL is used as
P-VOL of Continuous Access Synchronous
pair.
7005 8608 The specified S-VOL is not defined.
7005 8609 The specified volume is not set as a
reserved volume.
7005 8610 The S-VOL is a target volume for Auto
LUN.
7005 861 1 The specified volume is an S-VOL.
7005 8612 The specified volume is not an S-VOL.
7005 8613 The RAID level of the specified S-VOL is
not supported.
7005 8614 The command has been rejected,
because the specified S-VOL is used as
P-VOL of Continuous Access Synchronous
pair.
7005 8615 The command has been rejected,
because the specified S-VOL is used as
S-VOL of Continuous Access Synchronous
pair.
7005 8618 The S-VOL is already defined as a P-VOL.
Recommended Action
Check the RAID level, and specify a
volume of the supported RAID level, then
retry the operation.
Check the contents, and retry.
The volume used as S-VOL of the other
pair cannot be used as P-VOL.
Check the pair status.
When the P-VOL of L1 pair is used as
the P-VOL of Continuous Access
Synchronous pair, L2 pair cannot be
created.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous pair.
See the section about sharing Business
Copy volumes in the HP StorageWorks
P9000 Business Copy User Guide for
the relationship between the state of the
Continuous Access Synchronous pair and
the Business Copy operations.
Refresh the window, and retry the
operation.
Check the contents, and retry.
Release the Auto LUN setting.
Check the volume status.
Check the volume status.
Specify the volume number of the
supported RAID level.
The requested command cannot be
executed in the current status of
Continuous Access Synchronous pair.
See the section about sharing Business
Copy volumes in the HP StorageWorks
P9000 Business Copy User Guide for
the relationship between the state of the
Continuous Access Synchronous pair and
the Business Copy operations.
The S-VOL of Continuous Access
Synchronous pair cannot be used as
S-VOL of Business Copy.
Specify another volume.
Check the volume number.
Severity
Level
W
W
W
W
W
W
W
W
W
W
W
W
W
W
W
Part code 7005 239