HP StorageWorks P9000 Manual page 189

Table 53 Error codes (part code 6505) (continued)
Part Error Error Message
Code Number
6505 58264 Journal volumes cannot be registered
because Continuous Access Journal is
not installed.
6505 58265 Journal volumes cannot be registered
because Continuous Access Journal Z is
not installed.
6505 58266 The use of the specified volume is
prohibited by Volume Security for
Mainframe.
6505 58269 The specified restore journal is not
registered.
6505 58270 The Add Pair (Paircreate) operation
failed due to one of the following
reasons.
The specified restore journal has
already been paired with another
journal.
The combination of the restore journal
and the mirror ID specified when
creating Delta resync volume pairs
has already been used by the
ordinary (not Delta resync) volume
pairs.
6505 58271 The specified secondary data volume
cannot be used because of the following
reasons:
"S-VOL Disable" is set by Data
Retention.
The VMA setting differs between the
primary data volume and the
secondary data volume.
"Protection" is set by Volume
Retention.
6505 58272 A Concurrent Copy operation is in
progress on the specified secondary data
volume.
6505 58273 Either of the following settings is set to
the specified secondary data volume by
the Volume Security for Mainframe
function.
The volume belongs to the access
group or the pool group.
The setting does not allow the volume
to be used as a secondary data
volume.
6505 58275 The specified restore journal is not
registered.
Recommended Action
Install Continuous Access Journal.
Install Continuous Access Journal Z.
Check the Volume Security for
Mainframe settings on the specified
volume.
Check the status of the specified restore
journal.
Check the mirror status and the mirror
ID of the specified restore journal.
Check the following items on the Data
Retention window if the specified
secondary data volume is an
open-system volume.
Whether "S-VOL Disable" is set to the
specified secondary data volume.
Whether the VMA setting differs
between the primary data volume and
the secondary data volume.
Check whether the Protection attribute is
set on the Volume Retention window if
the specified secondary data volume is
a mainframe volume.
Check the status of the specified
secondary data volume.
Use Volume Security for Mainframe to
check the status of the specified
secondary data volume.
Check the specified restore journal.
Severity
Level
W
W
W
W
W
W
W
W
W
Part code 6505 189