Part Code 5205 - HP StorageWorks P9000 Manual

Table 45 Error codes (part code 05122) (continued)
Part Error
Code Number
05122 107003
05122 107004
05122 107005
05122 107015

Part code 5205

Table 46 Error codes (part code 5205)
Part Error
Code Number
5205 1076
5205 1077
5205 1078
5205 1079
5205 1080
5205 1081
5205 1082
5205 1083
Error Message
The process cannot continue due to
internal logic contradiction.
The process cannot continue due to
internal logic contradiction.
The process cannot continue due to
internal logic contradiction.
The process cannot continue due to
internal logic contradiction.
Error Message
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The specified volume(s) are already used
by Business Copy Z or Business Copy.
The volume is a LUSE volume. Cannot
change to reserve volume.
The volume specified as the reserved
volume has the Cache Residency setting.
The command was rejected due to one
of the following reasons.
The specified volume was blocked.
The specified volume was used as a
system disk.
The specified volume(s) are used as a
command device.
The reserved volume(s) is not equipped.
The specified volume is already reserved.
The configuration information on such
as a volume (LDEV) displayed on the
window might be out of date.
Recommended Action
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Retry the operation. If the same problem
occurs again, close the windows, refresh
it, then retry again. If the same problem
persists despite retrying, please contact
HP Technical Support.
Retry the operation. If the same problem
occurs again, close the windows, refresh
it, then retry again. If the same problem
persists despite retrying, please contact
HP Technical Support.
Refresh the window, then retry the
operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Recommended Action
Specify another volume.
The volume used by Business Copy Z, or
Business Copy cannot be used. Specify
another volume.
Check the setting.
Release the Cache Residency setting.
Recover the blocked volume, then retry
the operation. Also, the system disk
cannot be used as P-VOL. Specify
another volume.
Release the command device, or select
another volume.
Retry the same operation. If nothing
changes, please contact HP Technical
Support.
Click [Refresh All] on the [File] menu,
then retry the operation. If the same
problem persists despite retrying, please
contact HP Technical Support.
Severity
Level
E
E
E
E
Severity
Level
W
W
W
W
W
W
W
W
Part code 5205 1 19