HP StorageWorks P9000 Manual page 109

Table 38 Error codes (part code 3305) (continued)
Part Error Error Message
Code Number
3305 65691 Preparing for quick format.
3305 65728 The specified volume is not available to
execute VLL operation (Create LDEVs,
Delete LDEVs).
3305 65730 The system disk cannot be set on the
specified volume.
3305 65740 The configuration changing processes
are conflicting at DKC.
3305 65741 An error occurred during SVP
processing.
3305 65742 An error occurred during SVP
processing.
3305 65768 The disk subsystem is in internal process,
or some other user is changing the
configuration.
3305 65781 The specified volume contains a quorum
disk.
3305 65790 The specified volume includes a remote
command device being used by a mirror
of the journal group.
3305 68802 The specified volume includes a system
disk being used by the audit log.
3305 75017 The volume of 3390-V cannot be created
with the RAID level of the specified parity
group.
3305 76507 The specified LDEV cannot be used
because the LDEV has no access right
for a resource group.
3305 76508 The specified LDEV cannot be used
because the parity group the LDEV
belongs to has no access right for a
resource group.
3305 78032 The specified Processor Blade is not
mounted.
3305 78033 AUTO cannot be specified because the
Fixed attribute has been added to all of
the Processor Blades.
Recommended Action
Check the status and wait until the status
changes to a status that maintenance is
possible.
Check the specified volume.
Check the specified volume, and retry
the operation.
Check if the configuration changing
process by RAID Manager, Auto LUN,
or Quick Restore is not in the operation,
then retry the operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Wait for a while, then click [Refresh] on
the [File] menu. When an error occurs
during login, wait for a while and login
again.
Check the specified volume.
Check the specified volume.
Set the Audit Log buffer function to
"Disable," then retry the operation.
You cannot have a 3390-V volume in a
RAID 1 (2D+2D) parity group.
If you create a 3390-V volume, specify
a parity group other than the RAID
1(2D+2D).
If you do not create a 3390-V volume,
change to emulation type to a different
one.
Verify the available LDEVs.
Verify the available parity groups.
Check the specified Processor Blade.
Release the Fixed attribute, or specify a
mounted Processor Blade.
Severity
Level
W
W
W
W
E
E
W
W
W
W
W
W
W
W
W
Part code 3305 109