HP StorageWorks P9000 Manual page 194

Remote web console messages
Hide thumbs Also See for StorageWorks P9000:
Table of Contents

Advertisement

Table 53 Error codes (part code 6505) (continued)
Part
Error
Code
Number
6505
58349
6505
58352
6505
58353
6505
58354
194 Message (part code group 6nnn)
Error Message
The Add Pair operation failed because
the specified primary data volume had
a Protect attribute set by Volume
Retention.
The Add Pair (Paircreate) operation
failed because the specified primary
data volume was one of the following:
a Business Copy S-VOL
a Business Copy Z T-VOL
a reserved volume
The operation failed because the
specified secondary data volume was
one of the following:
An S-VOL of Business Copy.
A T-VOL of Business Copy Z or
Compatible FlashCopy.
A reserved volume of Business Copy
or Business Copy Z.
A P-VOL of Business Copy in Swap
or Reverse Copy status.
An S-VOL of Business Copy Z in
Swap or Reverse Copy status.
A P-VOL of Business Copy used in
conjunction with Continuous Access
Synchronous.
A P-VOL of Business Copy used in
conjunction with External Storage
Access Manager.
An S-VOL of Business Copy Z or
Compatible FlashCopy used in
conjunction with Continuous Access
Synchronous Z.
A volume used by XP Flex Copy.
A Thin Provisioning volume used as
a P-VOL of Business Copy.
A Thin Provisioning volume and a
source volume of Auto LUN.
The specified primary data volume is
used by another program product.
Recommended Action
From the Volume Retention window,
check the settings of the specified
primary data volume.
Check the status of the primary data
volume in the Business Copy window or
the Business Copy Z window.
Extract the possible combination of
program products from the combinations
of program products described in the
message. Check the status of the
secondary data volume from the window
of the program product. To use the Thin
Provisioning volume as a secondary data
volume, release the attribute of the
program product combined with the Thin
Provisioning volume, and then retry the
operation.
Check if the specified primary data
volume is used by any of the following
program products:
Business Copy/Snapshot
Continuous Access Synchronous
External Storage Access Manager
Auto LUN
Severity
Level
W
W
W
W

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xp p9500Storageworks p9500

Table of Contents