HP StorageWorks P9000 Manual page 115

Table 41 Error codes (part code 5105) (continued)
Part Error Error Message
Code Number
5105 6023 An error occurred during SVP
processing.
5105 6036 An error occurred during SVP
processing.
5105 6092 An error occurred during SVP
processing.
5105 6501 There is no monitoring data.
5105 7007 An error occurred during SVP
processing.
5105 71 1 1 An error occurred during SVP
processing.
5105 7428 An error occurred during SVP
processing.
5105 8002 The subsystem status is invalid.
5105 8916 An error occurred during SVP
processing.
5105 8918 An error occurred during SVP
processing.
5105 8919 The subsystem status is invalid.
5105 551 13 An error occurred during SVP
processing.
5105 551 14 There is no monitoring data. It might be
deleted by another users operation.
5105 55500 An error occurred during SVP
processing.
5105 55501 An error occurred during SVP
processing.
5105 56524 This function cannot be used by the
storage partition administrator.
5105 56525 Because the settings across the multiple
SLPRs are contained, the authority has
been shifted to the storage administrator
from the storage partition administrator.
5105 56526 The resources of other SLPR(s) cannot be
accessed.
Recommended Action
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Change the monitor switch to ON, and
accumulate the data.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Retry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Retry the same operation several times.
If the same error occurs, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Change the monitoring switch to
"Enable" for collecting data, then
perform the operation.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Select another window. If you want to
set this function, please contact the
storage administrator.
To continue the operation, please contact
the storage administrator and have the
settings across the multiple SLPRs
cancelled, then retry the operation.
To perform other operations, please
select a function button.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
Severity
Level
E
E
E
W
E
E
E
E
E
E
E
E
W
E
E
E
E
E
Part code 5105 1 15