HP StorageWorks P9000 Manual page 285

Table 71 Error codes (part code 8505) (continued)
Part Error Error Message
Code Number
8505 55016 The value set as the maximum number
of connections to each SLPR is invalid.
SLPR No:%s
8505 55017 The total of the values registered as the
maximum number of users that can
connect to each SLPR exceeds the value
set as the maximum number of
connections to the subsystem.
8505 55018 The number of SSIDs exceeds the
maximum that can be registered.
8505 55019 An invalid SSID was detected.
8505 55020 The same SSID is already registered in
a different SLPR.
8505 55021 The specified CU number is invalid.
8505 55022 An attempt has been made to either
register newly a CLPR that is already
registered, or delete a CLPR that is not
registered.
8505 55023 An attempt has been made to either
register newly a SLPR that is already
registered, or delete a SLPR that is not
registered.
8505 55024 Some parity groups are already
registered in a different CLPR.
8505 55025 The incorrect settings of parity group are
contained.
8505 55026 The specified port name (port number)
is invalid.
8505 55027 The cache size is incorrect.
CLPR No:%s
8505 55028 The specified cache size excluding the
cache residency size is less than the
minimum required.
CLPR No:%s
8505 55029 The total cache size is incorrect.
Recommended Action
Please contact HP Technical Support.
Please contact HP Technical Support.
Delete the SSIDs that are no longer
necessary, then retry the operation. If
this problem persists, please contact HP
Technical Support.
Correct the SSID setting, then retry the
operation. If this problem persists, please
contact HP Technical Support.
Please contact HP Technical Support.
Specify the correct CU number, then retry
the operation. If this problem persists,
please contact HP Technical Support.
Correct the CLPR settings, then retry the
operation. If this problem persists, please
contact HP Technical Support.
Please contact HP Technical Support.
Specify a different parity group, then
retry the operation. If the same problem
persists despite retrying, please contact
HP Technical Support.
Correct the settings of parity group, and
retry the operation. If the same problem
persists despite retrying, please contact
HP Technical Support.
Specify the correct port name (port
number), then retry the operation. If this
problem persists, please contact HP
Technical Support.
Correct the cache size setting, and then
retry the operation. If the problem
persists, please contact HP Technical
Support.
Correct the cache size so that it is equal
to or greater than the required minimum
value, and then retry the operation. If
this problem persists, please contact HP
Technical Support.
Set the cache size correctly, then retry
the operation. If this problem persists,
please contact HP Technical Support.
Severity
Level
E
E
E
E
E
W
W
E
W
W
W
W
W
W
Part code 8505 285