HP StorageWorks P9000 Manual page 195

Table 53 Error codes (part code 6505) (continued)
Part Error Error Message
Code Number
6505 58355 The specified secondary data volume is
used by one of the following program
products.
Business Copy/Snapshot
Continuous Access Synchronous
External Storage Access Manager
Auto LUN
6505 58451 The disk subsystem is in internal process.
Please retry the operation.
6505 58456 The Add Pair operation or the Resume
Pair operation failed because the
specified primary data volume was a
T-VOL of Compatible FlashCopy.
6505 58457 Continuous Access Synchronous, External
Storage Access Manager, or Continuous
Access Synchronous Z is using the
specified primary data volume. Specify
a mirror ID other than 0 if you use this
volume to create a pair.
6505 58458 A different mirror ID has already been
registered in the specified master journal.
Specify the same mirror ID, because only
one mirror ID can be registered in one
journal.
6505 58459 The Add Pair operation or the Resume
Pair operation failed because the
specified secondary data volume was
used by Compatible FlashCopy.
6505 58485 The Add Pair (Paircreate) operation
failed because the specified primary
data volume was one of the following:
the specified volume was a P-VOL of
Snapshot and was in Reverse Copy
status.
the specified volume was an S-VOL
of Snapshot.
6505 58486 The Paircreate operation failed because
the specified primary data volume was
a V-VOL for Snapshot.
6505 58487 The Paircreate operation failed because
the specified primary data volume was
a Pool-VOL.
Recommended Action
Check whether the specified secondary
data volume is used by the following
program products.
Business Copy/Snapshot
Continuous Access Synchronous
External Storage Access Manager
Auto LUN
If the problem persists despite retrying,
please contact HP Technical Support.
From the Compatible FlashCopy
window, check the status of the specified
primary data volume.
Specify a mirror ID other than 0, then
retry the operation.
Specify the same mirror ID as the
registered mirror ID, then retry the
operation.
From the Compatible FlashCopy
window, check the status of the specified
secondary data volume.
Confirm the state of the specified primary
data in the Snapshot window.
Check the state of the specified primary
data volume.
Confirm the status of the specified
primary data volume.
Severity
Level
W
W
W
W
W
W
W
W
W
Part code 6505 195