Part Code 81 10 - HP StorageWorks P9000 Manual

Part code 81 10

Table 67 Error codes (part code 81 10)
Part Error
Code Number
81 10 5001
81 10 5002
81 10 5003
81 10 5004
81 10 5627
81 10 5628
81 10 5629
81 10 5630
81 10 5631
81 10 5633
81 10 5634
81 10 5772
81 10 5773
81 10 5774
81 10 5775
81 10 5776
81 10 7060
81 10 9338
81 10 9339
81 10 9359
81 10 59036
282 Message (part code group 8nnn)
Error Message
Starting file transfer client.
Inaccurate data was acquired.
Failed to get the data.
The first tag is invalid.
The file name should be from 1 to 32
characters.
Following characters cannot be used for
the file name: " \ / , : ; * ? < > | and
space.
The file specified by [File Name on
Client] does not exist.
The file specified by [File Name on
Client] cannot be read.
The object specified by [File Name on
Client] is not a file.
The file path should be from 1 to 255
characters.
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
Modify mode released due to inactivity.
Restart Modify mode (press the
mode-switching button again) to
continue.
The file path of the specified file by [File
Name on Client] is incorrect.
The file specified by [File Name on
Client] is write-protected.
A file access error occurred.
The file type is invalid. Please select the
file with the extension "*.spd".
An error occurred during processing. If
this problem persists, please contact HP
Technical Support.
It is necessary to install Java Web Start.
Do you want to install it?
Please re-start your management session
after Java Web Start installation.
Do you want to install Java Web Start?
Do you want to overwrite the existing
file?
Recommended Action
Wait about three minutes, then retry.
The acquired data is inaccurate. If this
problem persists, please contact HP
Technical Support.
Retry the operation.
Correct the first tag.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Modify mode released due to inactivity.
Restart Modify mode (press the
mode-switching button again) to
continue.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
Correct the specified contents, and retry
the operation.
If this problem persists, please contact
HP Technical Support.
Click [YES] for continuing processing.
Click [NO] when you want to stop.
Click [OK] to log off after installation.
To continue processing, click [OK].
Otherwise, click [Cancel].
To overwrite the file, click [OK].
Otherwise, click [Cancel].
Severity
Level
W
W
W
W
W
W
W
W
W
W
E
W
W
W
W
W
E
W
W
W
i