HP StorageWorks P9000 Manual page 18

Table 3 Error codes (part code 0003) (continued)
Part Error
Code Number
0003 2002
0003 2003
0003 2004
0003 2005
0003 2006
0003 2009
0003 201 1
0003 2012
0003 2013
0003 2014
0003 2015
0003 2016
0003 2017
0003 2022
0003 2032
0003 2033
0003 2083
18 Message (part code group 0nnn)
Error Message
An error occurred during SVP
processing.
Such as Auto LUN and QuickRestore are
in progress.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
The status of the storage system requires
maintenance (for example, the storage
system is blocked, the shared memory is
inconsistent, or some other factor).
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred during SVP
processing.
An error occurred while connecting to
the storage system.
A service engineer is accessing the
system in Modify mode.
Network error detected; exclusive lock
is released forcibly.
An error occurred during SVP
processing.
Communication busy.
The SVP is not ready yet, or an internal
processing is being executed.
The subsystem status is invalid.
Recommended Action
If this problem persists, please contact
HP Technical Support.
Wait a while, then click [Refresh]. If this
problem persists, inconsistency of
configuration may have occurred. Please
contact HP Technical Support. If the
problem occurred when starting SVP,
check the version number of the
microcode and the configuration
information.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Please contact HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
If this problem persists, please contact
HP Technical Support.
Wait, then retry the operation.
If the same problem persists despite
retrying, please contact HP Technical
Support.
Wait, then retry the operation.
Re-execute the request for starting
exclusive lock.
If this problem persists, please contact
HP Technical Support.
Wait, then retry the operation.
Wait, then click [Refresh] on the [File]
menu. When an error occurs during a
login, wait, then log in again.
Check the DKC status and the current
status of the configuration setting. If
necessary, re-execute the setting
operation.
Severity
Level
E
W
E
E
E
E
E
E
E
E
E
W
W
E
W
W
E