HP StorageWorks P9000 Manual page 253

Table 62 Error codes (part code 7105) (continued)
Part Error Error Message
Code Number
7105 8502 You cannot reserve the volume, because
a remote copy pair exists in the same
subsystem frame.
7105 8503 You cannot create the new pair, because
a remote copy pair exists in the same
subsystem frame.
7105 8504 The command was rejected. Check the
composition, the status, or the volume
status of the pair.
7105 8505 The command has been rejected,
because the operation cannot be
accepted in the current pair status.
7105 8506 The command has been rejected,
because the specified T-VOL or reserved
volume is used by the host.
7105 8507 The Split Pair command was issued to
the pairs in the split status.
7105 8508 The Add Pair command was issued to
the pairs in the split status.
7105 8509 The Split command with the QUIESCE
specification was issued to a secondary
boot device.
7105 8510 The M-VOL Suspend command was
issued to a secondary boot device.
7105 851 1 You cannot reserve the volume, because
a path group is set.
7105 8512 Cannot perform Resync or Suspend
operation because of the path group
setting.
7105 8513 The command has been rejected,
because the specified S-VOL is used by
the host.
7105 8514 No reserved volume can be allocated.
7105 8515 The number of cylinders in the reserved
volume exceeds the maximum.
7105 8516 The number of S-VOL cylinders exceeds
the maximum.
7105 8517 The number of T-VOL cylinders exceeds
the maximum.
Recommended Action
Delete the Remote Copy pair.
Delete the Remote Copy pair.
Confirm the composition, the status, or
the volume status of the pair. (See the
HP StorageWorks P9000 Business Copy
for Mainframe Systems User Guide for
the relation between the composition of
the pair, status of the pair, or the volume
status of the pair and those operations.)
See the section "Status, permitted pair
operations" in the HP StorageWorks
P9000 Business Copy for Mainframe
Systems User Guide for the relation
between the status of pairs and the
commands that can be accepted.
Vary the T-VOL or the reserved volume
offline from the mainframe host, then
issue the command again.
You cannot execute the Split Pair
operation because the pair is already in
the split status.
You cannot execute the Add Pair
operation for pairs in the split status.
Check the contents, and then retry.
Check the contents, and then retry.
Detach the S-VOL from the host, or delete
the Remote Copy path.
Detach the S-VOL from the host, or delete
the Remote Copy path.
Vary the S-VOL offline from the
mainframe host, then issue the command
again.
Delete the Reserve volume.
Check the contents, and retry.
Check the contents, and retry.
Check the contents, and retry.
Severity
Level
W
W
W
E
W
W
W
W
W
W
W
W
W
W
W
W
Part code 7105 253