Part Code 3305 - HP StorageWorks P9000 Manual

Table 37 Error codes (part code 03222) (continued)
Part Error
Code Number
03222 105195
03222 105196
03222 105197
03222 105198
03222 105199
03222 105200
03222 105201
03222 105202
03222 105203
03222 10521 1

Part code 3305

Table 38 Error codes (part code 3305)
Part Error
Code Number
3305 1035
3305 1036
3305 1037
3305 1038
3305 1039
3305 1041
104 Message (part code group 3nnn)
Error Message
Zero is set in the size.
The size is not specified.
Other than the numerical value is set in
the size.
The specified LDEV is not an THP volume.
The specified LDEV is not in the state of
zero data discarding.
The specified LDEV is in the state of zero
data discarding.
The specified LDEV does not exist in the
configuration.
The status information of the specified
LDEV does not exist in the configuration.
The detailed information of the pool that
is associated with the specified LDEV
does not exist in the configuration.
The selected volume cannot be enhanced
any further.
Error Message
The SSIDs are not defined.
The size of the specified volume is
outside the setting range.
The free space remaining in the parity
group is not enough to install a
customized volume (CV).
The specified emulation type of the
customized volume (CV) is a type that
cannot be combined.
A path is defined to the specified
volume.
The CU number and the LDEV number
set in the VLL operation are the same as
those of other volumes.
Recommended Action
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Check the setting(s).
Execute refresh.
Execute refresh.
Execute refresh.
Please decrease the number of selections
of volumes of the object or add the
capacity of the pool.
Recommended Action
If this problem persists, please contact
HP Technical Support.
The size of volume that can be set differs
by the type of emulation.
Check the setting range of each
emulation type, then change the size of
volume.
The error does not occur normally
because it cannot be modified in the
window. In the unlikely event that this
error occurs, please contact HP Technical
Support.
The error does not occur normally
because it cannot be modified in the
window. In the unlikely event that this
error occurs, please contact HP Technical
Support.
Check the setting.
Check and correct the settings.
Severity
Level
W
W
W
W
W
W
E
E
E
E
Severity
Level
E
W
E
E
W
W