Table of Contents
Advertisement
Installing the Power Distribution Board
To install the power distribution board:
1. Observe the safety precautions, warnings, and cautions described in
2. Set the power distribution board in place.
3. Use the seven screws to secure the power distribution board to the chassis.
4. Connect the cable between the power distribution board and the SCSI backplane board.
5. Install the SCSI backplane board. For instructions, see
6. Install the power supplies. For instructions, see
7. Install the main board. For instructions, see
8. Install the top cover. For instructions, see
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide
"Installing the Top
A
B
Figure 129. Installing the Power Distribution Board
"Safety
"Installing the SCSI Backplane
"Installing a Power
Supply".
"Installing the Main
Board".
Cover".
Information"
Board".
TP01462
221
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the SR4850HW4 - Server Platform - 0 MB RAM and is the answer not in the manual?