Related Manuals for Intel NUC6i5SYH
Summary of Contents for Intel NUC6i5SYH
- Page 1 Intel NUC Kit NUC6i3SYH & NUC6i5SYH User Guide Intel® NUC Kit NUC6i3SYH Intel® NUC Kit NUC6i5SYH User Guide...
-
Page 2: Before You Begin
If such a station is not available, you can provide some ESD protection by wearing an antistatic wrist strap and attaching it to a metal part of the computer chassis. Installation Precautions When you install and test the Intel NUC, observe all warnings and cautions in the installation instructions. To avoid injury, be careful of: •... -
Page 3: Installing And Removing Memory
To open the Intel NUC chassis, follow these steps: 1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover. Installing and Removing Memory Intel NUC Kits NUC6i3SYH and NUC6i5SYH have two 260-pin DDR4 SO-DIMM sockets. Memory requirements: •... -
Page 4: Install So-Dimms
Intel NUC Kit NUC6i3SYH & NUC6i5SYH User Guide Install SO-DIMMs If you plan to install just one SO-DIMM, install it in the lower memory socket. To install the SO-DIMMs, follow these steps: 1. Observe the precautions in "Before You Begin" on page 2. -
Page 5: Install An M.2 Ssd
Intel NUC Kit NUC6i3SYH & NUC6i5SYH User Guide Install an M.2 SSD Intel NUC Kits NUC6i3SYH and NUC6i5SYH support 80mm and 42mm SSDs. For a list of tested M.2 SSDs, go to the Intel® Product Compatibility Tool: • NUC6i5SYH •... - Page 6 Intel NUC Kit NUC6i3SYH & NUC6i5SYH User Guide Install a 2.5” SSD or Hard Drive For a list of tested 2.5” hard drives, go to the Intel® Product Compatibility Tool: • NUC6i5SYH • NUC6i3SYH Follow these instructions to install a 2.5” Solid State Drive (SSD) or Hard Disk Drive (HDD): 1.
-
Page 7: Close The Chassis
Set the drive bay bracket down inside the chassis (C), Close the Chassis After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by hand with a screwdriver to avoid over-tightening and possibly damaging the screws. - Page 8 1. Using the four small black screws that were included in the box, attach the VESA bracket to the back of the monitor or TV. 2. Attach the two slightly larger black screws to the bottom chassis cover of the Intel NUC. 3. Slide the Intel NUC onto the VESA mount bracket.
-
Page 9: Connect Power
Intel NUC Kit NUC6i3SYH & NUC6i5SYH User Guide Connect Power Country-specific power plug attachments are included in the Intel NUC Kit box. 1. Choose the attachment for your region. Attachments in the box (Product codes) NUC6i5SYH NUC6i5SYHR NUC6i3SYH NUC6i3SYHR US – United UK –... -
Page 10: Install An Operating System
2. Slide the attachment (B) onto the power plug, locking it into place (A). 3. Connect AC power. Install an Operating System Refer to Supported Operating Systems for a list of Intel-validated Windows* operating systems, as well as versions of Linux that have been reported as compatible by Intel NUC owners. -
Page 11: Install The Latest Device Drivers And Software
Intel NUC Kit NUC6i3SYH & NUC6i5SYH User Guide Refer to Operating System Installation for system requirements and installation steps. Install the Latest Device Drivers and Software Here are the options for keeping device drivers current: • Allow the Intel® Driver & Support Assistant (Intel® DSA) to detect out-of-date drivers •...