Servicing the RAID on MotherBoard (ROMB) Components
Removing the Intel® RAID Activation Key
1. Observe the safety precautions, warnings, and cautions described in
2. Turn off all peripheral devices connected to the system.
3. Power down the system and unplug both AC power cords.
4. Remove the top cover. For instructions, see
5. Remove the memory board air baffle or the memory board from Slot C. For instructions, see
"Cold Removal of Memory
6. If a PCI card is in Slot 7, remove it to expose the Intel® RAID Activation Key holder. For
instructions on removing a PCI card, see
7. Insert the tip of a small flat-bladed screwdriver or equivalent under the plastic tab on the
snap-on plastic retainer holding the Intel® RAID Activation Key on the main board.
8. Gently push down on the screwdriver to lift the Intel® RAID Activation Key from the holder.
9. Store the Intel® RAID Activation Key in an anti-static bag.
10. Install the memory board air baffle or the memory board into Slot C. For instructions, see
"Cold Insertion of a Memory
11. If you needed to remove a PCI card from slot 7, install the card. For instructions, see
a Non-Hot-plug PCI
12. Install the top cover. For instructions, see
194
"Removing the Top
Board".
"Removing a Non-Hot-Plug PCI
Board".
Card".
"Installing the Top
Intel® Server Platforms SR4850HW4 & SR4850HW4/M Product Guide
"Safety
Information".
Cover".
Card".
"Installing
Cover".
Need help?
Do you have a question about the SR4850HW4 - Server Platform - 0 MB RAM and is the answer not in the manual?